| Technical Specifications |
| Machine Name |
Automatic Six Head ROPP Caps Sealing Machines |
| Option |
With Bowl or With Cap Elevator |
| Production Speed Per Hour |
6000 to 6600 Bottles per Hour (Speed Depends up on the size of caps & bottles). |
| Capping Unit |
Roll Over Pilfer Proof capper designed to thread and seal aluminum cap |
| Caps Feeding |
Vibratory Bowl Feeder |
| Caps Hammering |
Pneumatic System |
| Machine Motion |
Rotary Motion -Index Based |
| No Cap in Shute Elevator Stop (If machine is with Elevator) |
Sensor |
| Suitable for Products |
PET / Glass/Aluminum/ HDPE Bottle |
| Application |
To Tight & Seal the Caps on Bottles |
| Up-Down Movement |
Mechanical (Cam System) |
| Vibrator Pillar Mounting |
Main Platform |
| Speed Synchronization of Star Wheel & Capping Head |
Variable Frequency Drive |
| Working Height |
860 mm (+50 mm) |
| Conveyor Length |
6 Feet Depending upon the product |
| Machine Weight |
Approx 300 Kgs |
| Machine Platform |
Approx 1210mm (L) x 810mm (W) |
| Machine Dimension |
Approx 1830mm (L) x 1220mm (W) x 2440mm (H) |
| Change Parts |
Required in case of change in Cap Size & Bottle Size |
| Material of Construction |
| Machine main frame |
Square Pipe, Stainless Steel 304 |
| Machine Coverings |
Complete in Stainless Steel 304 |
| Product Contact Parts |
Stainless Steel 304 |
| Non-Contact Parts |
Stainless Steel / Mild Steel / Aluminum / Teflon (Whichever is applicable) |
| Conveyor Slat |
Stainless Steel 304 Slat with Nylon Strips on Side |
| Conveyor Shafts |
Mild Steel with Hard Chrome or Zinc Plating |
| Conveyor Sprockets |
Mild Steel or Nylon |
| Bearings |
SKF / Nachi / Timken |
| Plating(Wherever Applicable) |
ENP / Zinc / Hard Chrome / Blackening |
| Capping Unit |
Stainless Steel .304 |
| Bowl |
Stainless Steel 304 |
| Vibratory Bowl Feeder |
Mild Steel Cladded in Stainless Steel 304 |
| Vibrator Stand |
Mild Steel with ENP Plating |
| Cap Elevator frame (If machine is with Elevator) |
Stainless Steel 304 |
| Elevator Belt |
PVC |
| Shute |
Stainless Steel 304 |
| Support Rod on Existing point of indexing Star wheel |
Stainless Steel 304 |
| Star Wheel with Back Guide |
12 mm thick UHMW / Nylon |
| Guide Brackets |
Spectra make – Plastic |
| Guide Size |
100mm / 150mm |
| Guide Rod |
Stainless Steel 304 (10mm Round Bar) |
| Slat Chain Pitch |
3.5” Stainless Steel 304 |
| Capping Head Pillar |
Mild Steel with ENP / Hard Chrome |
| Electronics & Pneumatics Components |
| Capping Head Motor Make |
1 H.P Bonfiglioli |
| Capping Head Gear Box Make |
Bonfiglioli Ratio: 20:1 |
| Cap Elevator Motor Make (If machine is with Elevator) |
Bonfiglioli |
| Cap Elevator Gearbox Make (If machine is with Elevator) |
Bonfiglioli Ratio: 20:1 |
| Capping Head VFD Make |
1 H.P Delta |
| Sensor Make |
Sick / Leuze / Panasonic |
| Proxy |
Autonix / Pulset |
| “No Cap in Shute Elevator Stop” Sensor (If machine is with Elevator) |
Panasonic |
| Electrical Wiring |
Ferrule Numbering on all the wires with Proper Markings |
| Electrical Components |
ABB / Delta /Spectra |
| Pneumatics |
SMC / Festo / Janatics |
| Air Pipes |
SMC / Festo / Janatics |
| Wires & Cables |
Labb |
| Control Panel |
Relay Card (Push Button Type ) |
| Power & Air Consumption |
| Power |
1 H.P / 230 V.AC |
| Phase |
Single Phase |
| Compressed Air Required |
3 H.P Compressor (6 bar pressure 0.5 CFM) |
Reviews
There are no reviews yet.