Double Cone Blender

TECHNICAL SPECIFICATIONS
Model No.	Gross Capacity	Working Capacity	Overall Dimensions (in mm) (L) x (W) x (H) approx.	Discharge Height	Charge Opening	Power Supply
DPMDCB-5	16 Ltrs	10 Ltrs	750x580x650	300mm	100mm	0.5 H.P.
DPMDCB-10	35 Ltrs	20 Ltrs	1100x450x1200	300mm	100mm	0.5 H.P.
DPMDCB-25	80 Ltrs	50 Ltrs	1200x600x300	450mm	150mm	1.0 H.P.
DPMDCB-50	150 Ltrs	100 Ltrs	1400x800x1500	450mm	150mm	2.0 H.P.
DPMDCB-100	300 Ltrs	200 Ltrs	1850x900x1900	450mm	200mm	2.0 H.P.
DPMDCB-150	470 Ltrs	300 Ltrs	2000x1100x2000	450mm	200mm	5.0 H.P.
DPMDCB-200	615 Ltrs	400 Ltrs	2100x1200x2100	450mm	200mm	6.0 H.P.
DPMDCB-250	770 Ltrs	500 Ltrs	2200x1300x2200	450mm	200mm	7.5 H.P.
DPMDCB-300	1000 Ltrs	600 Ltrs	2300x1400x2300	450mm	200mm	7.5 H.P.
DPMDCB-400	1340 Ltrs	800 Ltrs	2350x1800x2350	600mm	250mm	7.5 H.P.
DPMDCB-500	1500 Ltrs	1000 Ltrs	2400x1900x2400	800mm	250mm	10 H.P.
DPMDCB-650	2000 Ltrs	1300 Ltrs	2800x2100x2700	800mm	250/400 mm	10 H.P.
DPMDCB-750	2500 Ltrs	1500 Ltrs	3000x2200x2600	800mm	250/400 mm	10 H.P.

Salient Features of Double Cone Blender

• The conical shape at both ends enables uniform mixing and easy discharge.
• All contact parts are made out of Stainless Steel 304 or 316 quality material as required by customer.
• Maximum care has been taken to ensure safe operation of the unit.
• Manual rotating facility with hand wheel for inching. The same will be provided with Stainless Steel cover & limit switch. (In 200 Kgs. & above model)
• Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning.
• One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone.
• Cone will be mirror polished from the inside & outside & structure will be matt polished.
• All moving parts covered with SS304 covers.
• Safety guards made from SS304 pipes provided in front of the m/c with limit switch.
• Panel fabricated from SS304 material with facility of three phase indication, D.O.L. starter, digital timer & Amp. Meter.
• As per customer requirement machine will be provided with left side drive or with right side drive.
• The conical shape at both ends enables uniform mixing and easy discharge.
• All contact parts are made out of SS304/316(as per customer requirement) quality material.
• Maximum care has been taken to ensure safe operation of the unit.
• Worm reduction gear use for speed reduction.
• Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.
• Inside & outside of the cone will be polished to the mirror finished.
• General structure made out of SS304 and Polished to the matt / mirror finish ( as required by you ) in GMP Model.
• All safety guards & covers made out of SS304 in GMP Model.
• Hand wheel will be provided for manual tilting of cone.
• Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.

Features

• Material is mixed to highest levels of accuracy even if some of the components are present in minor quantity
• It has flexible working capacity to 10 100% of filling rate
• Disintegration of agglomerates most often without additional tools
• Easy to clean
• Dust-and ex-proof models
• Space saving construction
• Various shaft sealing system
• Product discharge through gate, isem, ball segment or ball valve
• No danger of product contamination by lubricants

Applications

• Dry flavors
• Ceramic powders
• Food industry
• Flour
• Animal feeds
• Milk powder
• Pesticides & Herbicides
• Baby foods
• Spice blends
• Cosmetics
• Polyethylene
• Coffee
• Pigments